Fitting Six−Point Seat Belt Gt2 - Porsche 996 TT Repair Manual

01 Fitting six−point seat belt
The six−point seat belt is not fitted on vehicle delivery for the Club Sport equipment.
1. Loop technique for fastening
the seat belt to the bucket seat
cross member
Loop the belt strap in the direction of the arrow −inset− around the front transverse strut on the bucket
seat into the adjustible slider. The projection −dimension = X− of the belt strap must be at least 100
mm.
2. Pulling six−point seat belt through the openings in the bucket seat
Pull six−point seat belt through the upper openings in the backrest from behind −arrow A− and
through the openings in the seat frame from the side −arrow B− .
3. Fitting belt fitting
Position foam part −4− and belt fitting −5− at the left and right on the seat frame. With the shim −3−
and the fastening screw −2− , screw the belt fitting −5− tight. Position the cover −1− on the fastening
screw −2− .
Use the foam part −4− for the Club Sport
version.
For the Cup racing version, mount the bushing −6− instead of the
foam part.
Tightening torque: 50 Nm (37 ftlb.)
01 Fitting six−point seat belt GT2
GT2
1807