Porsche 996 TT Repair Manual page 2028

3. Remove the rear spoiler.
4. Tighten the fastening screws −18− and the lock ring −17− .
Tightening torque: 10 Nm (7.5 ftlb.)
2 Install air guide Insert air guide −16− and screw into place with the fastening screw −15− .
−16− Tightening torque: 10 Nm (7.5 ftlb.)
3 Install air guide Screw the air guide −13− into place on the inside of the lid with the fastening
−13− screws −14− . Make sure that the seal −14A− is fitted all around the air guide
−13− .
Tightening torque: 10 Nm (7.5 ftlb.)
4 Install mount Position mount −12− . Tighten the fastening screws −11− .
−12− Tightening torque: 10 Nm (7.5 ftlb.)
No. Procedure
5
Assembling rear lid
Instructions
einordnung
1965