Porsche 996 TT Repair Manual page 1783

MOST switch
Open (default)
Closed (internal ring)
30. Select Production mode and press >> .
31. Select Production mode Off and code with the F8 key.
32. Select Tuner parameters menu and code with the F8 key.
Tuner parameters
Europe
USA
South America
Australia
Asia
(South) Africa
Japan
33. Exit the PCM2 menu using the << key.
34. Read out the fault memory and erase it if necessary.
Note
Switch on the PCM2. If the PCM2 cannot be switched on, or the PCM2 switches on but no music can
•
be heard, switch off the ignition, remove the ignition key, close the doors and lock the vehicle. Wait
until the alarm system LED flashes normally . Unlock the vehicle and switch on the PCM2 again.
• If the PCM2 still does not switch on after this procedure, proceed in accordance with the Technical
Manual. ' 0, 9101 PCM/CDR23
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Teaching display and operator control unit (PCM 2)
einordnung
1720