Disassembly And Assembly Instructions; Disassembly - Porsche 996 TT Repair Manual

4 Rubber 1
support
5 Bellows 1
6 Coil spring 1
7 Vibration 1
damper
8 Spacer sleeve 1
9 Retainer 1
spring
10 Protective 1
bellows
11 Spring strut 1
mount
top of page

Disassembly and assembly instructions

Disassembly

CAUTION
Danger of injury due to spring tensioning!
• If necessary, tension the coil spring with the spring clamp until the piston rod is relieved!
• Never use an impact bolter to loosen or tighten the fastening nut!
Use commercially available changeover ratchet!
•
1.
Disassembly and assembly instructions
einordnung
Replace if necessary
Available as spare part only
in sets.
Mount in correct position
(tighter winding
downwards).
The coil spring is fitted
with a protective sheath on
one side.
The vibration dampers for
the right and left sides are
identical parts
Mount in correct position.
Mount on protective
bellows (No. 10)
The spring strut mounts for
the right and left sides are
identical parts.
In the case of used mounts,
the bearing shell can be
regreased with Autol Top
2000.
Manufacturer:
Autol−Werke
Paradiesstr. 14
D−97080 Würzburg
1839