Installing Transmission Oil Pump; Tightening Torques - Porsche 996 TT Repair Manual

2. Unscrew the fastening screws of the oil pump −A− .
3. Fasten the shop−made removal tool to the oil pump thread −B− with an M6 x 25 screw and drive
the oil pump out of the transmission housing with gentle taps with a hammer on the shop−made
removal tool.
top of page

Installing transmission oil pump

1. Grease the sealing rings of the transmission oil pump, e.g. with
Liqui−Moly .
2. Drive the transmission oil pump carefully into the transmission housing with a rubber
hammer.
3. Screw in the fastening screws between the transmission oil pump and the transmission
housing.
Tightening torque: 23 Nm (17 ftlb.)
4. Fit the transmission oil cooler => Removing and installing transmission oil cooler −
GT2 .
top of page

Tightening torques

Location
Fastening of transmission oil pump to transmission
housing
Removing transmission oil pump
einordnung
Thread
M 8 x 25 or M 8 x
30
996840, 996841
Tightening torque Nm
(ftlb.)
23 (17)
1882