Porsche 996 TT Repair Manual page 1800

Right−hand drive
18. Select Production mode and press >> .
19. Select Production mode Off and code with the F8 key.
20. Select Tuner parameters menu and code with the F8 key.
Tuner parameters
Europe
USA
South America
Australia
Asia
(South) Africa
Japan
21. Exit the Coding menu and switch to MOST actual installed components list in the CDR23 menu.
Note
• The installed components that are detected are displayed in the MOST actual installed components list
.
• Compare the installed components detected from the MOST actual installed components list with the
MOST required installed components list .
22. In the menu CDR23 select MOST required installed components list .
23. If the items in the actual list differ from those in the required list, update the MOST required
installed components list to the status of the MOST actual installed components list by coding.
24. Exit the CDR23 menu using the << key, read out the fault memory and erase it if necessary.
25. Exit the CDR23 menu using the << key.
Note
Switch on the car radio. If the car radio cannot be switched on, or the car radio switches on but no
•
music can be heard, switch off the ignition, remove the ignition key, close the doors and lock the
vehicle. Wait until the alarm system LED flashes normally . Unlock the vehicle and switch on the
radio again.
If the radio still does not switch on after this procedure, proceed in accordance with the Technical
•
Manual. ' 0, 9101 PCM/CDR23
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Teaching the car radio
einordnung
1737