Disassembling And Assembling Rear Spring Strut − Gt2 - Porsche 996 TT Repair Manual

top of page
Disassembling and assembling rear spring strut − GT2
No. Designation
1 Fastening nut
M 12 x 1.5
Notes about adjustment work on the spring struts
Qty. Removal
1 If necessary, pre−tension the coil spring with the
spring clamp before loosening the fastening nut.
This depends on the pre−tension of the coil spring.
Support at the piston rod with a countering tool
Sonderwerkzeug 9630 or an open−ended wrench
(7mm) when loosening the nut.
einordnung
Installation
Use new fastening
nut. Tighten to 60
Nm (44 ftlb.).
Position the spring
strut mount No. 3
first (see under
assembly
instructions).
1844