Porsche 996 TT Repair Manual page 2057

No. Procedure
1 Remove seat rail
cover
2 Undoing seat
screws at front
3 Undoing seat
screws at rear
top of page
Removing bucket seat GT2
Instructions
Insert a screwdriver under the locking tabs and press lightly upwards.
Caution!
Locking tabs can break.
Pull front seat rail cover −2− out of the right and left seat rails towards the
front.
Move seat to its rear limit position and undo the front M10 x 28 Torx screws
−3− from the right and left seat rails using an E 12 socket wrench insert.
Move seat to its front limit position and undo the M10 x 28 Torx screws −3−
from the right and left seat rails using an E12 socket wrench insert.
einordnung
1994