Disassembling Outer Bearing Race - Porsche 996 TT Repair Manual

2. Clamp the transmission case cover in
the vice.
3. Remove snap ring with pliers
4. Affix internal puller 30 − 40 mm behind cylindrical−roller bearing. Ensure correct
seating.
5. Screw internal puller together with counter support and pull out cylindrical roller bearing by turning
the nut on the counter support.

Disassembling outer bearing race

1. Clamp the transmission case cover in
the vice.
2. Remove snap ring with pliers
Dismantling cylinder−roller bearing
einordnung
1878