Porsche 996 TT Repair Manual page 2030

No. Designation
1 Electrical plug
connection
2 Additional
brake light
3 Wiring harness 1
Removing and installing rear−lid wiring harness
Qty. Removal
1 Press the lug of the electrical plug
connection −arrow− and separate.
Cut through the tie wrap on the
gas−filled shock absorber (for the
engine compartment lid) using side
cutters.
1 Disengage the cover at the side,
unlock lock in −direction of arrow−
. Remove brake light and disconnect
the plug connection.
−A− Pull out grommet with brake
light lead. Disconnect plug
connection −B− for fan on fan
housing. −C− engine compartment
einordnung
Installation
Plug in the electrical plug
connection. Fasten the lead on
the shock absorber for the
engine compartment lid with a
tie wrap.
Connect the plug and insert the
brake light. Lock the lock in
opposite direction of −arrow− .
Clip in cover.
Lay the wiring harness and
fasten lead into the mount with
the fastening clips. Connect the
plug −C− for the engine
1967