Porsche 996 TT Repair Manual page 1577

=> Processing of Porsche 2−component window
bonding agents
Note
• The bonding material has an open time of −15 min− , which means that the bonding material must be
applied and the car window must be assembled within this period of time.
• In order to ensure that the substance is completely mixed, apply a 30 mm long adhesive bead of fresh
adhesive to a piece of cardboard before processing.
3. Applying adhesive to the rear window
Apply 2−component bonding material with the adhesive gun −A− to the rear window along the cover
section as a triangular bead measuring −X = approx. 15 mm− .
Note
When applying the adhesive, it is essential to ensure that the adhesive bead overlaps by approx. 30
•
mm at the beginning and at the end.
4. Inserting rear window into the hardtop body
Installing rear window (hardtop)
einordnung
1514