Determining Disc Thickness S3 - Porsche 996 TT Repair Manual

10. Insert the preselected adjusting shim S3 into the transmission housing and install the tensioning plates
with the shafts.
top of page

Determining disc thickness S3

1. Push fixed wheel for 3rd gear on to the output shaft. The narrow collar faces the tensioning plate.
2. Shift into 4th gear.
3. Block the input shaft with special tool retaining device
9253 .
4. Push special tool assembly sleeve 9263 −A− and discs (Part No. 950.302.296.03) −B− on to the output
shaft.
5. Screw collar nut on to the output
shaft.
Tightening torque: 300 Nm (222 ftlb.)
6. Set the setting collar on special tool measuring mandrel VW 385/1 to the dimension a ( approx. 65
mm ).
7. Complete the measuring mandrel as shown in the illustration.
Determining disc thickness S3
einordnung
1895