Porsche 996 TT Repair Manual page 1306

3. Unlock locating peg −1− of the support using the commercially available removal tool. => Tightening
torques
4. Unscrew fastening screws −2− and nuts −3− and carefully pull the support up and out of the retaining
points.
5. Unlock and disconnect the electrical plug connection.
6. Detach holder −4− .
7. Pull control module out of the holder and pull it out downward at an
angle.
8. Press locking tabs −arrow− and disconnect plug connections from the control module.
top of page
Removing the control module
einordnung
1243