38 20 Removing And Installing The Rear Disc Brake Pads − Gt2 / Turbo With Pccb - Porsche 996 TT Repair Manual

46 38 20 Removing and installing the rear disc brake
pads − GT2 / Turbo with PCCB
Caution
Removal
Installation
WARNING
Danger of accident if brake pads with the wrong brake pad quality are installed!
Use only the type−specific brake pads in the Porsche Spare Parts Catalogue!
•
Note
• The GT2 is equipped with PCCB (Porsche Ceramic Composite Brake) as standard!
• In contrast to this, at the start of production, steel brake discs and brake pads are used at first!
The pad backing plates (rear side of the brake pads) must not be greased!
•
• 2 vibration dampers −arrows− are fitted on each of the brake−pad supports!
• Vibration dampers are provided as additional damping measures!
• Replace vibration dampers each time the pads are changed!
• The damper plates have an adhesive protective film! The protective film must be pulled off before
installation!
46 38 20 Removing and installing the rear disc brake pads − GT2 / Turbo with PCCB 1919