14 Shaft bevel gear (with threaded washer) 2
15 Bevel pinion
16 Axle
17 Thrust ring (inside)
18 Housing
top of page
Disassembling GKN differential lock
1. Remove differential. ' 39 40 19 Removing and installing differential and differential lock. − GT2
2. Clamp differential lock in the vice with special tool clamping jaws
9646 .
3. Remove tapered roller bearing −A− with
puller.
4. Undo hexagon−head bolts −B− and remove the crown wheel −C− .
5. Unscrew 3 cross−recess screws −A− and remove lid −B− .
Note
The installation position of the lid in relation to the housing is marked for refitting.
•
6. Remove inner parts − see overview −.
top of page
Assembling GKN differential lock
Note
Disassembling GKN differential lock
einordnung
4
2
1
1
1909