Installing Rear Air Ducts - Porsche 996 TT Repair Manual

Installing rear air ducts

1. Push air duct (brake−air spoiler) onto the lower rear axle control arm from the
front.
Subsequently fit the retaining clip −2− (included in the scope of delivery) from the rear. The
retaining clip −2− must be inserted into the slot of the air duct −arrow− at the top.
Connect the retaining clip −2− to the air duct −1− . For this purpose, push the three expansion rivets −3−
(included in the scope of delivery) into the bores drilled in the bracket and the air duct (two from above
and one from behind).
Note
• The illustration shows the rear of the air duct −1− (removed)!
• The left and right air duct −1− and retaining clip −2− differ from eachother!
2. Mount the air duct in the same manner on the other side of the vehicle.
Installing rear air ducts
einordnung
996840, 996841
1913