Porsche 996 TT Repair Manual page 1868

1. Push air guide (brake−air spoiler) onto the lower rear axle control arm from the front.
Subsequently fit the retaining clip −2− (included in the scope of delivery) from the rear. The
retaining clip −2− must be inserted into the slot of the air guide −arrow− at the top.
Connect the retaining clip −2− to the air guide −1− . To this purpose, push the three expansion rivets −3−
(included in the scope of delivery) into the bores drilled in the bracket and the air guide (two from above
and one from behind).
Note
The illustration shows the rear of the air guide −1− (removed)!
•
• The left and right air guide −1− and retaining clip −2− differ from eachother!
2. Mount the air guide in the same manner on the other side of the vehicle.
Installing rear air guides
einordnung
996840, 996841
1805