Porsche 996 TT Repair Manual page 1239

41. Remove coolant hoses.
42. Place workshop jack and preassembled engine retainer plate underneath with slight load.
Spacer 9111/5 fitted
Engage support lever in horizontal
position.
43. Undo transmission support.
44. Separate engine carrier from the engine mounts (wrench size 18).
45. Carefully and in steps, lower the engine−transmission unit by approx. 10 cm.
46. The following parts must be undone or removed from this position:
Disconnect plug connection of tank vent.
Press unlocking buttons and simultaneously pull off the line.
47. Disconnect vacuum line for the brake booster
Removing engine
einordnung
1176