Installing Fusible Element In The Current Distributor - Porsche 996 TT Repair Manual

4. Unscrew the two hexagon nuts M 5 −3− from the blown fusible element −1− and remove with the
washers −2− .
top of page

Installing fusible element in the current distributor

Note
• The following spare parts must be replaced.
Hexagon nut M 8, 1 piece
Repair kit − replacement fusible element
1. Insert new fusible element −1− , using new washers −2− and new hexagon nuts −3− M 5.
Tightening torque: 4 Nm (3 ftlb.).
2. Position and engage the blue after−sales service cover −A− .
3. Close the current distributor cover until it engages −arrow− .
4. Affix the blue service
label.
5. => Installing the current distributor
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Removing fusible element from the current distributor
einordnung
1779