1. Release lead lock for the ABS plug connection −arrow A− and pull off both plugs −arrow B− .
2. Undo fastening screw −1− .
3. Take the lead out of the holders −arrows A− .
4. Open the clips −arrows B− and remove the lead −arrow C− .
5. Remove fabric tape −D− .
Note
•
When cutting off the ABS lead, make sure that the length of lead in the interior is sufficient for
attaching the new lead.
6. Cut off the lead in area −E− and remove it.
7. Cut through the fabric tape in the radiator tank, in the area −a− , and expose the remaining ABS lead.
top of page
Removing front ABS lead
einordnung
1953