top of page
Removal
CAUTION
PCCB (Porsche Ceramic Composite Brake): Danger of material damage during wheel removal/installation
(danger of damage to brake discs)!
Use assembly aids (assembly pins) in order to exclude any possibility of heavy contact of the wheel
•
with the brake disc! The assembly aids (2 assembly pins) are located in the luggage compartment!
1. Screw the 2 assembly aids (assembly pins), instead of 2 wheel bolts, into the wheel hub before wheel
removal/installation. During removal, first remove the three remaining wheel bolts and remove the wheel
carefully, without touching the brake discs.
2. Remove the retainer (safety bracket) −arrow− and extract the retainer pin inwards.
3. Pull out the warning contact wire on the brake caliper and remove the warning contacts from the
brake pad plates.
Note
•
Replace warning contacts if the core of the wire is worn or worn through!
•
The warning contact can continue to be used if there are only scrape marks on the plastic part of the
warning contact!
Removal
einordnung
1920