Porsche 996 TT Repair Manual page 1819

• When sticking a new sensor, make sure that no air pockets are caught between the gel and the
windscreen. Air pockets could impair the function of the sensor.
• Sensor, orientation lights, wires and wiring ducts are spare parts.
If the old rain sensor is installed: begin with the instructions on Page 5.
No. Procedure
1 Removing cover of infra−red
interior sensor
2 Line routing
3 Disconnecting the plug connection Press plugs −3− and pull apart −arrow− .
No. Procedure
Removing rain sensor
einordnung
Instructions
Remove both covers and unscrew both screws −1− .
Disengage holder −2− for the line −arrow− and pull line
forward behind the headliner.
Instructions
1756