Removing control module for rain sensor
WARNING
When working in the area of the wiper link, the ignition key must be removed.
No. Procedure
Remove the cover above the battery and fluid tank.
Turn on the windscreen wiper system and when the wiper reaches a vertical position on the
windscreen turn off the ignition.
1
Removal of cover for rain sensor
control module
2
Removing plug of rain sensor
control module
Removing control module for rain sensor
einordnung
Instructions
Unscrew fastening screws for cover.
Switch on ignition and let wiper link run in end position.
Remove cover with control module.
Open slide control of plug −A− and remove plug −B− .
1762