Back Panel Components; Factory Reset Button - Cisco Meraki Catalyst 9300/X/L-M Series Installation Manual

6 System error: Switch failed to complete local provisioning.
Switch is completely provisioned but unable to connect
7
to Meraki cloud.
8 Firmware download / upgrade in progress
There is a fault with the power supply, fan, or network module
9
(not traffic-related)
10 Switch is fully operational and connected to the Meraki cloud

Back Panel Components

Inactive components: When operating in the Meraki-managed mode, the C9300 will disable the RJ45 console port.
Item Component
Management Interface (Aux
1
Port)
2 Stack Ports
3 Redundant Fans
4 StackPower Ports
5 Power Supplies

Factory Reset Button

To perform a factory reset, keep the mode button pressed for 20 seconds or more. The switch will reboot and revert to
LED
Description
Status
Connected, used for easy access to the local status
Green
page
N/A Stack Cables are connected here
Green Active and operational
N/A StackPower cables are connected here
Green Active and functional power supplies
Solid amber
Solid amber
Blinking green
Solid Blue
Blinking amber
Solid green
7