Suzuki WagonR+ RB310 Service Manual page 1822

INSPECTION
STEP
1 Was "ENGINE DIAG. FLOW TABLE" performed?
2 Check exhaust system for leakage, loose
connection and damage.
Is it good condition?
3 Check HO2S-2 and Its Circuit.
Was HO2S-2 output voltage indicated on scan
tool in step 3) of DTC confirmation test less
than 1.275 V?
4 Check Short Term Fuel Trim.
Did short term fuel trim very within –20 – +20%
range in step 3) of DTC confirmation test?
ACTION
GENERAL INFORMATION AND ENGINE DIAGNOSIS 6-1-59
YES
Go to Step 2.
Go to Step 3.
Go to Step 4.
Check "BLU" and
"BRN/WHT" wire for
open and short, and
connection for poor
connection. If wire and
connection are OK,
replace HO2S-2.
NO
Go to "ENGINE DIAG.
FLOW TABLE".
Repair or replace.
"BLU" or "BRN/WHT"
circuit open or HO2S-2
malfunction.
Check fuel system. Go
to DTC P0171/P0172
Diag. Flow Table.