Porsche 928 Workshop Manual page 704

-
928 Manual Transmission/Controls, Case
34
Note When: Special
NO. Description Qfy. Removing Installing Instructions
1 Plug (magnetic) 1 Torque:
22 Nm (16 ftlb)
2 Bolt 12
MBxZZ-8.8 Torque:
9 Nm (7 ftlb)
M6x22-12.9 Torque:
16 Nm (12 ftlbl
3 Washer 12 Plain washers
are used in-
stead of these
washers for
tranrm. with
reverse gear lock
4 Case cover 1
5 Gasket 1
6 Vent 1
7 Roll pin 1 Engage 5th gear
and drive out
8 Split pin 1 First drive out
roll pin no. 7
9 Internal selector rod 1 Position correctly.
depression for set
screw "lust face left
10 Spring Only for
tranrm. with
reverse gear lock
11 Shift finger 1
12 U-spring 1 Convex side faces
down
13 Lockout spring 1
14 Backup light switch 1
15 Plunger 1 Stepped end faces
switch
16 Plug 1 Torque:
19 Nm (14 ftlbl
17 Seal 1 Replace
hinted inGermany. "1, 19B2
Disassembling and Assembling Transmission 34-11