Porsche 928 Workshop Manual page 786

37
Automatic Transmission / Controls. Case
928
2. Tnsrall linkage with washer and roller.
1 - Linkage
2 - Washer
3 - Roller
4 - Leaf spring
5 - Roller on needles
3. Install leaf spring and roller running on needles.
4. Install holder and tighten bolr to specified
rorque.
5. Push spring on to bearing pin and attach in trans-
mission case. Tension spring wirh a scribe or
suitable wire hook and slide on the parking lock
37 - 50
Disassembling and Assembling Transmission Case
Printed in Germany