Porsche 928 Workshop Manual page 1054

37
Automatic Transmission/Controls, Case
928
18. Pull off vacuum hose on modulating
pressure box.
19. Disconnect control pressure cable on
transmission. This is done by pushing
locking bar of guide in direction of arrow
(arrow A) and turning guide counter-
clockwise (arrow 6).
Pull out guide from above carefully.
Disconnect control cable on operating
rod.
a
37 - 120
Removing and Installing Transmission
Printed in Germany
20. Place universal transmission
jack
under-
neath transmission and tighten rubber
strap.
21. Remove front and rear reinforcement
plates.