Porsche 928 Workshop Manual page 268

15
Engine, Cylinder Head, Valve Drive
928
Checking and adjusting camshaft setting, Type 928 GTS (5,4 I)
As of MY '92
Engine Type M 28.49/50
Note
Along with the introduction of new camshafts
as of MY '92 for engine type M 28.49/50
928 GTS, the camshaft timing was changed.
Adjusting
Cylinder bank 1...4
Checking and setting dimension:
1.83 kO.1 mm
Cylinder bank 5...8
Checking and setting dimension:
2.08 50.1 mm
To adjust the camshafts, proceed in the order
described on page 15 134.
15 - 142
Checking and adjusting camshaft setting, Type 928 GTS (5,4 I)
Printed in Germany - XXVII, 1991