Porsche 928 Workshop Manual page 940

928 Manual Transmission /Controls, Case 34
5.If necessary, turn adjusting pin
to
set force of preselect spring
to specified value.
Note:
If the spring force is changed,
recheck the clearance s = 0.2
+ 0.1 mm between selector finger
and selector rod and readjust if
necessary (see Step 3).
6.As a check, select each gear in
turn with Special Tool 9155 (turn
drive pinion during this
procedure) and ensure that all the
gears can be selected in the
correct manner.
Printed in Germany - XVI, 1987
Adjusting Gear-shift
34 - 218 c
('87 Models Onward)