Porsche 928 Workshop Manual page 1087

a
928
Automatic Transmission/Controls, Case
37
Assembling
Note:
When assembling, coat all bearings
and friction surfaces with ATF.
Soak new brake bands and coated
plates in ATF for approx. 1 hour
before installation.
l.Insert guide ring and with
Special Tool 9119, drive in
sealing ring right way round,
sealing lip (arrowed) facing
outward toward brake-band piston
cover.
Z.Insert O-ring and sealing ring.
Screw in threaded plug with new
sealing ring and tighten.
Tightening torque 10 Nm (7 ftlb).
3.Place O-ring (arrowed) in groove.
Printed in Germany - XVI,1987
Disassembling and Assembling 37 - 153
Transmission