Porsche 928 Workshop Manual page 711

34
Manual Transmission/Controls, Case
928
19. Install internal selector rod with shift finger and
springs as shown in figure. Concave surface of
spring faces down to selector rod.
20. Turn internal selector rod 180° with Special
Tool 9155 and install pin for shift finger. The
torsion spring will be under tension in this
position and cavity for pointed screw in internal
selector rod faces left (looking forwardl.
A - Spring (concave surface faces down)
I3 -Spring (only for transmissions with reverse
gear shift lock)
21. Check by shifting through all gears with Special
Tool 9155.
34-18
Disassembling and Assembling Manual Transmission
Printed in Germany