Porsche 928 Workshop Manual page 842

39
Differential/Transaxle System
928
REMOVING AND lNSTAI.l.lNG DIFFERENTIAL
0
Removing
1. Drain transmission oil.
Note
2. Unrcrciv axle Ilange bolt and remove axle
flaqx.
Prcload of the tapered roller bearings could cause
tension on the case when tightening bolts for the
side covers, which later could impair installation
of the rear cover. consequently the rear cover
should be installed before tightening the bolts.
Installing
Drive in axle flan&e real with US 8050/10.
79 - 4
Removing and Installing Differential Printed in Germany