Porsche 928 Workshop Manual page 937

34
Manual Transmission/Controls, Case
928
4. Move shift arm into 2/3 shift plane and
adjust it by turning adjusting pin
(approx. l/2 turn clockwise or
anticlockwise) that it does not protrude
completely into opening of 2nd J 3rd
gear shift rod.
r,. i
.'y -ny-
,' i'
,.
- '9.
~,.==i- I;;
1
_ ":c-, ,,
I' r-
: >
~ .<
.-,, _.
AL- ,
,-.
..;-
'! AH :~
..-
'1.
L- -2:
5. Check by shifting in and out of all gears
carefully with Special Tool 9155
(turning drive pinion if necessary) and
note, whether shift arm has access to
4th/5th gear shift rod and lst/reverse
gear shift fork in 2/3 shift position as
well as access to 2nd13rd gear shift rod
in 4/5 shift position
Note
Deviations must be corrected accurately
after checking shifts, since perfect shifting
depends on correct adjustment.,Turning
the adjusting pin (1) will change the force
of preselector spring (2). so that turning the
adjusting pin for corrections should be
kept to a minimum fapprox. l/2 turn
clockwise or anticlockwise).
34-218
Adjusting Shift
Printed in Germany