Porsche 928 Workshop Manual page 789

37
Automatic Transmission/Controls. Case 928
1. Take transmission section out of crate and
remove protective caps.
\ :=--
/+;q
-.*,," .i'" ,R
y.+ 1
r~~;~fGj&g~ 1 'a\
i- ( ,d,yJ $-
Note:
The outer seal between the transmission case and
final drive is missing on transmission section for
manufacturing reasons.
2. Drive in outer seal to correct position with
Special Tool 9180 (also refer to page 37 - 34).
Note:
The outer seal must be installed so that its sealing
lip and spring supporting the sealing lip face the
final drive.
Installing Automatic Transmission Section
Printed in Germany