Porsche 928 Workshop Manual page 1037

32
Clutch, Automatic Torque Converter
928
a
/
NOTES ON REMOVING AND INSTALLING
r
I'
Removinq
l.Remove transmission.
./ ,. , J
,/ '"
-yp? pf./
w
/ ;gzp,$ :
2.Using Special Tool 9216, attach
transmission to assembly support.
6.Attach Soecial Tool 9301 to
torque converter and carefully
lift out converter.
3.Place transmission upright and
working through the openings in ~~
the converter casing, remove
converter mounting bolts.
!
4.Remove mounting bolts for
converter casing and remove
casing.
Installinq
Note:
5.Measure installation depth of
converter and make a note for
reassembly.
Up to '86 models = approx. 16 mm
'87 models onward = approx. 28 mm
If the ATF smells burnt or if the
fluid contains particles of pad
material, torque converter and ATF
cooler must be rinsed.
If particles of metal are found in
the ATF pan, the torque converter
must be replaced. Rinsing will not
remove all metal particles and
damage to the transmission may
result.
32 - 104 Removing and Installing
Torque Converter
Printed in Germany