Porsche 928 Workshop Manual page 932

34
Manual Transmission/Controls, Case 928
4.Remove mounting bolts for drive
pinion, secure Special Tool 9144
to bearing assembly and turn the
latter with shims "S
the reverse idler sh d
' until
ft can be
removed with Special Tool VW 771.
. . _
+ $,p: .
C'.\ P,
t
J
c.
===B
5.Remove circlip for bearing cover
and remove cover with two suitable
flat-nosed pliers.
6.Withdraw drive pinion with
Special Tools 9140 and 9148.
Note:
It is essential to remove the
layshaft axle beforehand and lower
layshaft to bottom of transmission.
Assembling:
l.With a blob of grease, fix thrust
washer for layshaft to case.
2.Place fully assembled layshaft
case.
I
in
l
34 - 214 h
Disassembling and Assembling
Printed in Germany
Manual Transmission ('87 Models Onward)