Porsche 928 Workshop Manual page 984

928
DifferentiaI/Transaxle System
39
DIASSEMBLING AND ASSEMBLING DIFFERENTIAL
Diassembling
1. Pull off taper roller bearing inner race
P 263.
2. Coat oval surface of differential gears
._,
I mMm2 paste.
3. Install large differential gears with
press-fit threaded plates through large
opening in differential case and hold
with joint flanges.
'4.
Lr:s
pm,- -
;;,
e. -
--..A.Ed-
'k:,
"1
.?:
m
Assembling
1. Place ring gear on case and tighten ring
gear bolts to torque of 165 Nm (119 ftlb).
Slide lockplate into groove of bolts,
squeeze together at front with a pliers
(to unite lockplate with bolt) and bend
down over a hexagon surface to lock.
Printed in Germany -
X. 1984
Disassembling and Assembling
Differential
39-211