Porsche 928 Workshop Manual page 936

928
Manual Transmission/Controls, Case
34
ADJUSTING SHIFTS
Note
Insert locking sleeve and spring for no-play
arrest of 2nd and 3rd gear shift rod and
move to correct installed position with a
locally manufactured holder (see page
34 - 215).
34567
1 -
2-
3-
4.
5-
6-
J-
Adjusting pin
Preselector spring
Shift rod, 4th and 5th gears
Preselector lever
Interior shift rod
Shift arm
Shift rod, 2nd and 3rd gears
1. Adjust preselector spring (2) with
adjusting pin (1) enough that it just
barely touches the roller of preselector
lever (4). In this position shift arm (5)
and preselector lever (4) will engage in
openings of 4th and 5th gear shift rod.
2. Measure force of preselector spring.
Nominal value: 22 N.
Mount Special Tool 9155 on interior
shift rod, attach a conventional spring
scale (0 . . . . . . . 50 N) below ball, pull
interior shift rod and shift arm into
2/3 shift plane and read spring force
from spring scale.
3. If necessary, adjust force of
preselector spring to 22 N by turning
the adjusting pin.
-
--dL#
Printed in Germany -X, 1984 Adjusting Shifts 34-217