Porsche 928 Workshop Manual page 1002

39
Differential,
Tranaaxle System 928
- Adjust the cranking torque to 100 Nm by
turning the adjusting nut with the sickle
spanner. Then back off the adjusting nut to
the locking groove at which the torque is
just below the cranking torque of 20 Nm.
Secure the adjusting nut with a tab washer.
A = Tab washer
B = Adjosring nut
287.39
39 - 212r Dismantling and assembling the proportional-slip differential
a
Printed in Germany
- XXIV. 1989