20
Fuel
Supply
928
REMOVING
AND INSTALLING
INITIAL
FUEL
PUMP IN TANK
(JAPAN)
Note
Installing
Conform with safety regulations for working on
fuel systems!
1. Always use a new gasket.
Removing
2. Tightening
torque for pump in tank: 25 Nm.
1. Disconnect ground wire at battery.
2. Draw off fuel.
3. Remove bottom tank cover. Pinch fuel intake
hose with a standard hose clamp.
4. Disconnect 4 mounting
points of suspension
straps and let complete suspension with fuel
pump and fuel filter hang down to one side.
a
5. Disconnect electric wire plugs, hose clamp and
pump in tank, and remove. Catch escaping fuel
20-14
Removing and Installing
Initial Fuel Pump
Printed in Germany
in Tank (Japan)