Porsche 928 Workshop Manual page 811

928 Automatic Transmission / Gears. Valve Body
38
5. Remove locating pin for control pressure valve.
6. Install oil filter.
7. Install oil pan with gasket and tighten mounting
bolts to specified torque.
8. Screw oil filler tube on oil pan and tighten
coupling nut.
9. Add ATF as specified
As from May
I.
1979 a rubber insen is insraIled
IO eliminate hydraulic noise in rhe lubricating
circuir.
Rubber inserra can be service installed in a trans-
mission without one.
M
j ;;i:: ~: m
,: ,
a ,
I?
_ .*
~-a CY
h
'.{"i
*-$ i
.\-2': , - *
)pji--- .- ~~*_ -
,. =
--rJf?$<p:qTG$;
IO. Check shifts during test drive.
11. Check ATF level while warm.
A - Rubber insert
12. Tighten bolts on oil pan to specified torque.
l
Printed in Germany - III, 1979
Removing and Installing Shift Valve
1 lousing
3R - 23