Porsche 928 Workshop Manual page 916

928
Manual Transmission/Controls, Case
34
a
4. Pull out clamp for reverse gear with a
suitable pliers.
5. Unscrew drive pinion mounting bolts,
mount Special Tool on bearing assembly
and turn until reverse gear shaft can be
removed with Special Tool VW 771,
6. Remove circlip for input shaft.
7. Pull out input shaft and bearing cap
with Special Tools 9140 and 9148
Note
Always first remove countershaft and
lower countershaft to bottom of
transmission.
$..,\ "'FJ
I
1
-2 ?4
,\, ~.,j
\ + $;
pFi'. ,_
\'
Assembling
1. Screw in preselector spring with stud
from inside to outside.
r
I
A = Preselector spring
Printed in Germany
-X, 1984 Disassembling and Assembling 34 209
Transmission