Porsche 928 Workshop Manual page 722

928
Manual Transmission/Gears and Shafts
35
DETERMINING SHIM THICKNESS "X" OF PINION SHAFT LO& NUT
N.ote
To guarantee perfect running of spur gears from pinion shaft and countershaft. shims must be used
on the pinion shaft.
A - Distance from pinion head to bearing surface of lock nut
B - Distance A + r (pinion shaft deviation)
r -Pinion shaft deviation (e. g, N 12)
1 - Design specification
Transmission Type G 28.03 108.85 mm up to transm. no. 118 1092
108.70 mm from transm. no. 118 1093
Transmission Type G 28.05 110.70 mm from transm. no. 110 5001
Printed in Germany
VI, 1982
Determining Shim Thickness "X" 35.11