Porsche 928 Workshop Manual page 810

38
Automatic Transmission / Gears, Valve Body
928
6. Unscrew mounting bolts of shift valve housing
and remove shift valve housing.
2. Install locating pin (suitable punch) for control
pressure valve in shift valve housing.
7. Remove plug tubes with sealing bushings and
pull off sealing husbings from plug tubes.
3. Guide in shift valve housing carefully. Make
SUE in particular that range valve engages
correctly in catch plate.
Installing
1. Fit new sealing bushings on both ends of plug
tuber and install tubes in transmission. Screw
two locally
made
centering pint in trans-
mission case.
4. Install mounting bolts with spring washers and
tighten to specified torque.
A
Centering pins
38 - 22
Removing and Installing Shift Valve
Housing
Printed in Germany