Porsche 928 Workshop Manual page 1139

38
Automatic Transmission/Gears, Valve Body
928
a
DISASSEMBLING AND ASSEMBLING SHIFT VALVE HOUSING
Disassembling
Note:
Absolute cleanliness is essential for any work
on the shift valve housing. If at all possible
work should be done on a plastic lined work-
bench (leather sheets would be especially
suitable). After disassembling all parts must
be washed and dried with compressed air.
1. Remove plastic valve.
A = Plastic valve
8 = Check valve
C = Operating pin
D = Blocking valve K 1
2. Remove both mounting bolts (arrow).
,J a .TI~m.'n,*:
m ~#j li -
1 c
a
3. Hold and turn shift valve housing and
pick-up housing around.
4. Lift off pick-up housing with transfer
plate carefully.
5. Take out all valves and balls.
38 128
Disassembling and Assembling Shift Valve Housing
Printed in Germany