Fuel Manaaement
- LH - JetroniclCont.
Removing
and installing injection valves (32~valve engine)
1, Remove air intake hoses and air filter sys-
tem as a unit.
2. Slacken holder of exhaust sampler and
hose clamps on intake pipe and lift off in-
take manifold.
3. Remove both untion nuts from fuel-distribu-
tion pipe, using a second open-end wrench
to counter the nuts. Catch the fuel from the
pipe in a suitable container.
4. Remove ignition lead and cable clip from
distribution
pipe. Disconnect distribution
pipe from intake pipes and lift off.
5. Disconnect
electrical connections,
remove
retainers and extract injection valves.
Installation
1. Replace injection valve seals. Apply a thin
coat of oil to the housing bore.
2. Visual check to ensure system leak tight-
a
Removing
and installing
injection
valves
(32-valve
engine)
24 - 209
Printed in Germany - XXVII. 1991