Porsche 928 Workshop Manual page 1107

928 Automatic Transmission/Controls, Case
37
l
Note:
Holder must be properly pinned in
place.
-8" ,qP--
i.
I/-- .
a
66.Install shift valve casing,
range selector must engage
carrier on detente plate
(arrowed).
a
67.Insert combination bolts and
tighten to 8 Nm (5.9 ftlb).
Note length of bolts. The three
arrowed bolts are only 50 mm long,
the remaining 12 bolts are 55 mm
long.
Begin by tightening the two bolts
A/B slightly to center the
shift valve casing.
68.Tighten combination bolts for
back plate and leaf spring
holder to 8 Nm (5.9 ftlb)
a
Printed in Germany - XVI,1987
Disassembling and Assembling 37 - 173
Transmission