Porsche 928 Workshop Manual page 741

37
Automatic Transmission / Controls. Case 928
9. Push up wire harness through opening in spare
wheel well and install
rubber pmm~i.
13. Mount transmission on cross member and
tighten all bolts to specified torque.
10. Lower universal transmission lift.
Note:
Watch marks for correct reins+allation.
11. Position rear axle and tighten all bolts except
for the two transmission mount bolts.
A second person is required to install rear axle.
12. Lift transmission and detach Special Toot
9164.
a
37 - 8 Removing and Installing Transmission
II, 1970 -
Printed in Germany