Porsche 928 Workshop Manual page 836

928 Auromatic Transmission / Gears. Valve Body
38
No. Description
Q'y.
Uote When
Special
Removing Installing
lnsiructions
14 oute1 plate
1
Shouldered side faces
(5. 0 mm thick)
corrugated snap ring
15 Guide ring
1
16
Brake band drum 1
DISASSEMBLING AND ASSEMBLING CLIITCH K 2
a
Disassembling 3. Remove all springs and plares from rhe brake
band drum.
1. Remove flar snap ring wirh a suirable tool. while
pressing the supporr flange down slightly in a Note
press wirb a suitable thrust pad (e.g. VW 511).
The quantity of springs for clutch pistons will vary.
If new springs are required, rhe same quantity as
removed must be installed.
4. Remove corrugated snap ring and outer plate as
well as guide ring for springs.
6. Squeeze snap ring together with a pointed pliers
and remove one-way clutch oura race.
2. Take support flange and piston out of brake
band drum.
Note
Supporr flange and piston must be held together
IO prevent the piston from falling OIX.
Printed in Germany - III, 19'i9
Disassembling and Assembling Clutch K 2
38 - 49